HAZARD IDENTIFICATION USING THE HAZARD IDENTIFICATION AND RISK ASSESSMENT AND DETERMINING CONTROL (HIRADC) TECHNIQUE (CASE STUDY AT LABORATORIES AT UNIVERSITAS ISLAM NEGERI SUMATERA UTARA)

  • Nabila Syahlan Universitas Islam Negeri Sumatera Utara
Keywords: Occupational Safety and Health, laboratory

Abstract

Every workplace has a risk of accidents and health problems. The university is a workplace that has a variety of laboratories with a variety of risks, so prevention and control efforts are needed to prevent accidents and health problems for lecturers, staff, and students. Prevention and control efforts are attempts to build a culture of Occupational Safety and Health (OSH) in Higher Education. This study was conducted to determine the type of hazard, risk assessment based on the source of danger and risk assessment based on the type of hazard in all laboratories at UINSU. Hazard identification and risk assessment were analyzed with Hazard Identification and Risk Assessment and Determining Control (HIRADC) Technique. The identification results obtained by sources of hazards in the form of chemical hazard. Public Health Science Faculty has 2 sources of potential hazard in high risk level and 2 sources of potential hazards in high risk level were in Science and Technology Faculty. It is expected that the identification results can be evaluated and used as reference material to determine efforts to repair and control the risk of hazards in the laboratory at UINSU. The laboratories need to have guidelines and procedures for Occupational Safety Health.

References

Assessment R, Sugarindra M, Ragil M, Novitasari AT, Ismail AR, Adilah N. Identification of Potential Hazard using Hazard Identification and Risk Assessment Identification of Potential Hazard using Hazard Identification and Risk Assessment. 2017;
Shamsuddin KA. Investigation the effective of the Hazard Identification , Risk Assessment and Determining Control ( HIRADC ) in manufacturing process. 2015;2(8):80–4.
Restuputri DP, Fakhri M. THE ANALYSIS OF HEALTH AND SAFETY ASPECTS BY USING HAZARD IDENTIFICATION AND RISK ASSESSMENT ( HIRA ) METHOD. 1978;37–44.
Journal I. Hazard Identification and Risk Assessment in Automotive Industry Hazard Identification and Risk Assessment in Automotive Industry. 2017;(May).
Putra RE, Prasetya A. Pengaruh Program Keselamatan dan Kesehatan Kerja. Adm Bisnis. 2018;56(2):153–9.
Athqiya AA, Haqi DN, Alayyannur PA, Paskarini I, Sugiharto FM. Hazard identification, risk assessment, and determining controls in laboratories. Indian J Public Heal Res Dev. 2019;10(7):877–83.
Frida Qurbasari D, Alayyannur PA, Haqi DN, Ernawati M, Sugiharto FM, Athqiya AA, et al. Risk at the educational laboratory in Indonesia. Indian J Public Heal Res Dev. 2019;10(7):558–62.
Cimera N, Haqi DN, Alayyannur PA, Denny Ardyanto Y, Rizkiawati NL. Risk analysis of occupational disease and accident in environmental health laboratory. Indian J Forensic Med Toxicol. 2020;14(1):327–31.
Fachrudin MB, Haqi DN, Alayyannur PA, Widajati N, Wijaya YR. Application of risk management using hiradc method in analytical chemical laboratory of university in Indonesia. Indian J Forensic Med Toxicol. 2020;14(1):316–21.
Santoso JW, Haqi DN, Alayyannur PA, Mulyono, Wijaya YR. Risk assessment in the laboratory of epidemiology. Indian J Public Heal Res Dev. 2019;10(8):982–5.
Published
2021-10-31